Adegle PSG final

The PSG was talked about earlier on, with changes expected to be made.

so here it is, back and improved. so what are the changes?

this will be the production stage, no more changes will be made according to Lin-Kai.

so I receive a new yellow PSG, I gave a few throws, its indeed better, a whole lot better I'd say. The bind was the biggest problem, it slips, bind wasn't tight, these all changed, the bind is tight, it no longer slips. I took the yoyo apart, trying to see what are the changes, i see no changes on the yoyo body, the only change I see, is the spacer. it became thinner.

the new spacer's on the left, old one on the right.

thats a pretty huge change, alot of thickness taken off, but it works really well, so much better. some photos of the new one in yellow, compared to the old one in blue/green.

look at the gap, its pretty obvious.

so again, there's no changes made to the yoyo body, only to the spacers.

that being said, there's still one issue with the PSG. the cap.

remember I mention it will fly off? well this run of PSG have their caps glued on, so it'll not fly out. but you can still remove it, you need more effort though.
Lin-Kai mentioned that he'll try to fix the cap issue on the next plastic that they're planning to make. so I guess we're expecting a new plastic from Adegle soon.

I also have to add that, new bearing has been used on the new PSGs, Lin-Kai didn't specify what type of bearing, but he said its a better one compared to the old one, because the bearing in my old PSG, the one for abuse, is kinda damaged.a

and since the spacer is the only change being made to the PSG, I requested for spare new spacers for the old PSG just so you guys can try the PSG in stock and abused stage.